Sybase Desktop manual Repairing your Pylon installation

Installing

Repairing your Pylon installation

If you suspect that a file supporting your Pylon installation may have become corrupted, you can use the Pylon installer to repair any damaged files while preserving all of your installation settings.

Caution When you do a Repair install, all of your manual configuration settings are changed back to the defaults. This is faster than uninstalling and reinstalling Pylon, but you should make notes on all of your manual configuration settings before proceeding, so that you can manually restore them.

To repair your Pylon installation:

1.Place your Pocket PC or Palm OS device in its cradle and perform a final sync. After syncing, leave your device in its cradle.

2.Close Lotus Notes.

3.Double-click the installer file pylondesktopPocket PC.exe or pylondesktop- palm.exe.

The Pylon installer Welcome panel for a maintenance install, shown in Figure 3-8, “Pylon installer Welcome panel for maintenance install” (page 50), appears.

4.Select Repair and click Next.

The Pylon installer Setup Status indicates the percentage progress. When it is complete, the Pylon installer Maintenance Complete panel is displayed.

5.Click Finish.

Desktop User Guide for Pylon Conduit and Pylon Pro, Version 5.4 / 51