Syncing custom databases

Setting sync action

Sync actions determine the general sync behavior of Pylon Pro filters. There are four sync options to choose from for each filter you choose to sync:

Synchronize the files

Handheld writes to Desktop

Desktop overwrites Handheld

Do Nothing

These four options are explained in detail in Table 4-2, “Sync Action options,” on page 65.

Note If you are syncing a custom database for the first time, set Desktop overwrites Handheld as the sync action for the initial sync. Change the sync action to back to Synchronize the files for two-way syncing in subsequent sync operations.

To set the sync action for a Pylon Pro custom database:

1.Open the Pylon Configuration Database. For instructions, see “Accessing Pylon on your desktop computer” (page 60).

2.In the Navigation pane, click Configurations.

3.Select the configuration you wish to edit, then click Edit Configuration.

4.In your configuration document, make sure the box beside the Pylon Pro icon is checked.

5.Underneath Action, click the drop-down arrow correponding to the custom database filter for which you want to set the sync Action.

The sync Action Select Keywords panel appears.

Figure7-5Select Keywords panel for Pylon Pro Action

6.From the Keywords list, select an action, then click OK.

The panel closes and you return to your configuration document.

7.Click Save and Close to save your changes and exit your configura- tion document.

Desktop User Guide for Pylon Conduit and Pylon Pro, Version 5.4 / 141

Page 141
Image 141
Sybase Desktop manual Setting sync action, 5Select Keywords panel for Pylon Pro Action