Chapter 3 Software Configuration
2.Install LAN Driver to Windows NT4.0
(1)In the Main group of NT, select the “Control Panel” icon.
(2)In the Control Panel window, choose the “Network” icon.
(3)In the Network Settings dialog box, choose the “Add adapter” button. The Add Network Adapter dialog box appears.
(4)In the list of network cards, select “<other> Requires disk from manufacturer”, and then press <Enter> button.
(5)Insert the LAN driver utility, and enter the filename (ex. A:\ pathname) where the setup file OEMSETUP.INF is located, and then choose OK button.
(6)The screen will appear “Select Line Speed” dialog box, which is provided by RTL8100BL.SYS driver. The default value is “auto” so that the line speed can be auto detected as 10MB or 100MB, while the RTL8100BL.SYS is loading.
(7)The screen will appear “Input Ethernet ID” dialog box, which is provided by RTL8100BL.SYS driver. This option is only required when you have more than one RTL8100BL PCI Fast Ethernet adapters on this computer. Select “SKIP” if only one adapter is installed on this computer.
(8)“Bus Location” displayed in next screen. Your machine contains more than one hardware bus, please select the Bus Type and Bus number on which your network adapter card is installed.
(9)NT will then perform the binding process. If any additional network software options were installed, you may be prompted for specific information for these packages.
(10)
Note: For Installing Multiple LAN Adapters:
Enter Windows NT and follow above setup procedure step 2, in the “Network Settings” dialog box, choose the “Configure...” button. The “Input Ethernet ID” dialog box appears and input adapter’s Ethernet ID. Last step to select OK and close NETWORK SETUP. Select SKIP if only one adapter is installed on this computer.
For more information on installation procedure, please refer to TXT directory found on LAN DRIVER UTILITY.
|