PSB Speakers PSB-1688LF M1 user manual Init Display First

Chapter 4 Award BIOS Setup

7.Use IR Pins

This item allows you to select IR transmission routes, one is RxD2m, TxD2 (COM Port) and the other is IR-Rx2Tx2

8.Onboard Parallel Port

This item allows you to determine access onboard parallel port controller with which I/O address.

9.Parallel Port Mode

Select an operating mode for the onboard parallel (printer) port. Select Normal, Compatible, or SPP unless you are certain your hardware and software both support one of the other available modes.

10.EPP Mode Select

Select EPP port type 1.7 or 1.9.

11.ECP Mode Use DMA

Select a DMA channel for the parallel port for use during ECP mode.

INIT DISPLAY FIRST:

This item allows you to decide to active whether PCI Slot or on-chip VGA first.

PSB-1688LF USER′S MANUAL Page: 4-21