Chapter 3 Software Configuration
3-6. USB2.0 SOFTWARE INSTALLATION UTILITY
3-6-1. Installation of Utility for Windows 98SE/ 2000/XP
Intel USB 2.0 Enhanced Host Controller driver can only be used on Windows 98SE, Windows 2000 and Windows XP on Intel Desktop boards. It should be installed right after the OS installation, kindly follow the following steps:
1.Place insert the Utility Disk into Floppy Disk Drive A/B or CD ROM drive.
2.Under Windows 98SE, 2000, and XP system, go to the directory where Utility Disc is located.
3.Start the “System” wizard in control panel. (Click Start/Settings/Control Panel).
4.Select “Hardware” and click “Device Manager ” button.
5.Double Click “USB Root Hub”.
6.Select “Driver”.
7.Click “Install” to install the driver.
8.Follow the instructions on the screen to complete the installation.
9.Click “Finish” after the driver installation is complete.
