Chapter 6: Sett ings
Scancode Remapping
Ikôn Rugged PDA (Windows Mobile 6.1) User Manual 131
The Remap Scancode dialog box is displayed.
• Type the scan code in hexidecimal in the field labelled Scancode.
Virtual Key, Function And Macro
The radio buttons at the bottom of the dialog box allow you to define to what the scan code
will be remapped to: Virtual Key, Function or Macro.
When Virtual Key is selected, you can choose to force [SHIFT] to be on or off when the
virtual key is sent. If No Force is selected, the shift state is dependent on whether the shift
state is on or off at the time the virtual key is sent.
When Function is selected, a list of valid functions appears in the dialog box.
When Macro is selected, the macro keys available on your unit are listed in the dialog box.
• Choose Virtual Key>Function or Macro.
• Choose a function from the Function list, and tap on OK.
Editing A Scancode Remap
•In the Scancode Remapping tab, tap on the remap you want to edit.
• Tap on the Edit button, and make the appropriate changes.
• Tap on OK to save your changes.
Note: The ‘Label’ field displays the default function of the scancode you
are remapping.