Chapter 6: Sett ings
Wireless Statistics
Ikôn Rugged PDA (Windows Mobile 6.1) User Manual 223
• Tap on the proxy type you want to change. For the appropriate server type, type the
proxy server name and port.
• Tap on OK.
6.43 Wireless Statistics• Tap on Start>Settings>Connections tab>Wireless Statistics icon to display the com-
munication statistics of your wireless connection along with the radio card name, MAC
address, driver version and NDIS Compliance information.
• Tap on the Zero button to reset the statistics.
6.44 Wireless WAN (Windows Mobile 6.1 Classic Only)The Wireless WAN icon is visible for Ikôns running Windows Mobile 6.1 Classic. An Ikôn
equipped with a GSM/GPRS, CDMA/1xRTT or UMTS radio has wide area networking
data transfer capabilities.
6.44.1 Softkey Bar Icons
Wireless WAN icons in the softkey bar indicate the status of your wide area network con-
nection. Note that these icons are only visible when a GSM/GPRS, CDMA/1xRTT or
UMTS radio is installed in the unit, and the interface is enabled.
The letter in the signal strength icon (G for GSM/GPRS, U for UMTS and X for
CDMA/1xRTT) indicates that a packet data service is available and initialized. Keep in
mind that the signal strength icon is displayed without a letter if packet data service is not
available or if it is available but not yet initialized.
User interaction is required (e.g. the user is required to enter a PIN).
A non-recoverable (fatal) error has occurred.
GSM/GPRS Status Indicators
Signal strength is between 1% and 20%.
Signal strength is between 21% and 40%.
Signal strength is between 41% and 60%.
Signal strength is between 61% and 80%.