PYLE Audio FWM352 user manual Playing discs, Replacing discs during playback

CD/MP3-CD Operations

English

3Press OPEN•CLOSE to close the disc tray.

➜ READING is displayed as the CD player scans the contents of a disc, and then the total number of tracks and playing time (or the total number of albums and tracks for MP3 disc) are shown.

Notes:

–Load the discs with the label side facing up.

–To ensure good system performance, wait until the disc tray completely reads the disc(s) before proceeding.

–For MP3 disc, the disc reading time may exceed 10 seconds due to the large number of songs compiled into one disc.

Playing discs

To play current disc on the disc tray

●Press PLAY•PAUSE ÉÅ.

➜All loaded discs will play once, then stop.

➜During playback, the selected disc tray, track number and elapsed playing time of the current track are displayed.

➜For mixed mode discs, only one mode will be selected for playback depending on the recording format.

Note:

–When playing a mixed mode disc, you may find a very short mute track inserted into the total number of tracks available in your disc.

To play the selected disc only

●In CD mode, press DISC 1/2/3 (or CD 1/2/3 on the remote control).

➜The current disc will play once, then stop.

To interrupt playback

●Press PLAY•PAUSE ÉÅ.

➜ The display freezes and the elapsed playing time flashes when playback is interrupted.

●To resume playback, press PLAY•PAUSE ÉÅ again.

To stop playback

●Press STOP Ç.

Text display during playback

In CD mode

●Press DISPLAY to show the current track number and remaining playback time.

In MP3-CD mode

●Press DISPLAY repeatedly to show the current album and track numbers followed by ID3 information (if available).

Replacing discs during playback

1Press DISC CHANGE.

➜ The disc tray will open without interrupting current playback.

2To change the inner disc, press DISC CHANGE again.

➜"OPEN" is displayed and the disc will stop playing.

➜The disc tray will close to retrieve the inner disc, then reopen with the inner disc accessible.

Selecting a desired track/passage

To search for a particular passage during playback

●Press and hold à or á and release it when the desired passage is located.

➜ During searching, the volume will be reduced.

To select a desired track

●Press í or ë repeatedly until the desired track is displayed.

●If playback is stopped, press PLAY•PAUSE ÉÅto start playback.

Selecting a desired Album/Title (MP3 disc only)

To select a desired album

●Press ALBUM -/+(à or á) repeatedly.

To select a desired title

●Press TITLE -/+(í / ë) repeatedly.

16