English
Radio Reception
y
CD1/2/3 TUNER AUX MUTE
REPEAT PROGRAM SHUFFLE
VOL
TITLE
MHz |
ALBUM
DISPLAYDIMSLEEP
TIMER
ON/OFF
DSCDBB
Tuning to radio stations
1Press TUNER to select TUNER mode.
➜ "TUNER" is displayed. A few seconds later, the current radio frequency will appear on the display.
2Press TUNER again to select the desired waveband : FM or MW.
3Press and hold à or á until the frequency indication starts to change, then release.
➜ The display will show "SEARCH" until a radio station with sufficient signal strength is found.
4Repeat step 3 if necessary until you find the desired radio station.
●To tune to a weak station, press à or á briefly and repeatedly until optimal reception found.
Storing preset radio stations
You can store up to 40 preset radio stations in the memory.
Automatic Preset Programming
1Press TUNER to select TUNER mode.
To begin automatic preset from a desired
preset number
●Press í or ë to select the desired preset number.
➜If a radio station has been stored in one of the presets, it will not be stored again under another preset number.
2Press and hold PROGRAM until "AUTO" is displayed.
➜PROG starts flashing.
➜AUTO is displayed and available stations are programmed in order of waveband reception strength.The first preset automatically stored will then be played.
➜When all the available radio stations are stored or the memory for 40 presets are used, the last preset radio station will be played.
To stop storing the automatic preset
●Press PROGRAM or STOP 9 on the system.
Note:
– If no preset number is selected, automatic preset will begin from preset (1) and all your former presets will be overridden.
18
