PYLE Audio FWM352 user manual Troubleshooting, Problem, No Disc is displayed, Solution

Models: FWM352

1 27
Download 27 pages 33.69 Kb
Page 26
Image 26

English

Troubleshooting

WARNING

Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help.

Problem

NO DISC” is displayed.

DISC NOT FINALIZED” is displayed.

Radio reception is poor.

Recording or playback cannot be made.

The system does not react when buttons are pressed.

Sound cannot be heard or is of poor quality.

The left and right sound outputs are reversed.

Solution

Insert a disc.

Check if the disc is inserted upside down.

Wait until the moisture condensation at the lens has cleared.

Replace or clean the disc, see ÒMaintenanceÓ.

Use a finalized CD-RW or a correct MP3-CD format disc.

Use a finalised CD-RW or CD-R.

If the signal is too weak, adjust the antenna or connect an external antenna for better reception.

Increase the distance between the Mini HiFi System and your TV or VCR.

Clean deck parts, see ÒMaintenanceÓ.

Use only NORMAL (IEC I) tape.

Apply a piece of adhesive tape over the missing tab space.

Remove and reconnect the AC power plug and switch on the system again.

Adjust the volume.

Disconnect the headphones.

Check that the speakers are connec ted correctly.

Check if the stripped speaker wire is clamped.

Make sure the MP3-CD was recorded within 32-256 kbps bit rate with sampling frequencies at 48 kHz, 44.1 kHz or 32 kHz.

Check the speaker connections and location.

26

Page 26
Image 26
PYLE Audio FWM352 user manual Troubleshooting, Problem, No Disc is displayed, Solution