BASIC OPERATION
6.EQ BUTTON
Swing the SEL knob in the direction of the EQ to turn to equalization function and to select desired audio mode. There are four kinds of mode as below:
JAZZ 
CLAS 
POP 
ROCK
7. APS/DISP BUTTON
In Radio Mode:
a) Memory function:
swing the SEL knob in the direction of APS/DISP for approximately 2 seconds to active automatic station storage. The radio searches within the current frequency band, e.g. FM1, for the strongest station are then allocated to the corresponding storage locations. Then the station of the first storage location
is set. If you would like to search for more stations in the FM band, press the BND button(5) in order to change to the FM2 or FM3 band. Swing the SEL button (4) again in the APS/DISP direction for about 2 seconds to continue search.
b) Scan Function:
if the SEL knob is moved briefly in the direction of APS/DISP, the radio briefly plays all the preset stations of the frequency band. (The scan function ends automatically at the first storage location of frequency band FM1.)
In Disc Mode:
swing the SEL knob briefly in the direction of the APS/DISP on the front panel , the playback picture (the monitor on the unit only) will not to be shown, only the audio will be heard. (Swing it again to resume the playback picture mode.) You can press SEL knob briefly to select the “BG COLOR” by repeatedly pressing the SEL knob, then rotate the VOL+/- to select the background color among of the “AUTO, BG COLOR: 01........BG COLOR: 11”, in “ AUTO” mode, the monitor of
unit will change the background color automatically. also you can select the TV system ( only in EUR frequency mode) among of the “PAL BG”, “PAL DK”, “PAL I”, “PAL MN” by using the
8.MU BUTTON
Press it button to switch of the loudspeakers for a short period. The word MUTE flashes in the display. Press it again to cancel the mute function. This function can also be cancelled by rotating the VOL multifunction button.
9.
(ANGLE)BUTTON
you can change the viewing angle of the operating unit . Press this button up to four times in order to select the desired position.
10. 
BUTTON
Press the 
button to interrupt playback of the CD (pause function). Press this button again to cancel this function.
11./ BUTTONS (TUNE, SEEK, TRACK, SKIP UP/DOWN)
a)In DISC, USB mode:
if you wish to jump forwards or backwards press the SEL button (4) briefly in
the | or | direction. (Note: in DVD mode, press the SEL button continually | ||
twice | in | direction to skip back one track during playback.) |
| |
Note:For some VCD 2.0 | and | buttons may | ||
be unavailable. |
|
| ||
12
