PYLE Audio PLR7N manual Selecting Mode, Adjusting Volume, Audio Mute, Reset

SELECTINGMODE

Press the MODE button to select the desired mode. Each time you press the button, the mode changes as follows.

RADIO -> AV1 -> AV2 -> AV3 (CD OR VCD CHANGER) -> AV4 (TV)

NOTE

1.AV3 has only video input.

2.The CD/VCD changer must be connected to the 8 pin DIN socket on the rear of the unit with 8 pin DIN cable in our CD/VCD changer gift box.

3.The video output of VCD changer must be connected to AV3 video input.

If the video output of VCD changer is not connected AV3 video input, AV3 video input can be used for video input of other video sources.

ADJUSTINGVOLUME

Press the VOLUME button to adjust the volume level.

AUDIOMUTE

Press the MUTE button to make the sound quite. Press the MUTE button again to return to the previous audio level.

RESET

1.If the unit does not seem to be working right, press the RESET switch with a pencil or other pointed object. The RESET switch is mounted behind the small hole on the upper right of the front face, to the left of the AUDIO INPUT hole.

2.If the RESET switch is pressed, the power will be off, press the POWER button to turn power on.

3.If reset does not solve the problem, consult your installer.

10