PYLE Audio PLR7N manual Direct CD Changer Control

DIRECTCDCHANGERCONTROL

On the CD changer mode, you can directly control CD changer functions just by pressing the buttons on the remote controller for our monitor unit.

STOP	button	: to make the playing of the disc stop.
PAUSE	button	: to stop the playing of the disc .
		press again to play again.
PLAY	button	: to make the disc play.
REW	button	: to quickly move backward of the disc until you reach
		the desired section of the track.
FF	button	: to quickly move forward of the disc until you reach
		the desired section of the track.
DISC	button	: to search forwards through the discs in a CD changer
		until you reach the desired disc.
DISC	button	: to search backwards through the discs in a CD changer
		until you reach the desired disc.
TRACK	button	: to search forwards through the tracks on the disc
		until you reach the desired track.
TRACK	button	: to search backwards through the tracks on the disc
		until you reach the desired track.

NOTE

1.The AS/ATM button on the remote controller can be used as the PAUSE button.

2.When the CD changer mode is selected again after switching the CD changer mode to other modes or the power of the monitor unit is tuned on again after tuned it off, the disc plays at the last played position.

3.When the ignition is switched on again after the car key is pulled out on CD changer mode, the disc plays at the beginning of the track last played.

19