PYLE Audio PLR7N manual Setting the Navigation

NAVIGATION

SETTINGTHENAVIGATION

1. Connect a NAVIGATION system to AV1 or AV2 Input terminals on the rear of the unit.

2.Press the MODE button to select radio mode.

3.Press the MENU button to select following picture.

RADIO SUB MENU

4. Press the SEARCH UP/DOWN button to select NAVIGATION.

5. Press the VOLUMEbutton to select AV1 or AV2 that NAVIGATION system is connected to.

Each time you press this button, AV Input changes as follows AV 1 -> AV2 -> OFF

WATCHINGTHENAVIGATIONPICTURE

Press the NAVI button on radio, AV1, 2 or 3 mode. The monitor shows the navigation picture.

NOTE

Do not select the AV mode connected to the NAVIGATION system with the MODE button. If AV Input connected to the NAVIGATION system is selected with the MODE button, the monitor does not show the NAVIGATION picture. The monitor shows the WARNING picture.

15