Cisco Systems WRVS4400NRF Running the VPN Router Software Wizard, Using the VPN Setup Wizard

Using the VPN Setup Wizard	6
Running the VPN Router Software Wizard

STEP 1 Click Firewall > Basic Settings.

STEP 2 Enable Remote Management and enter 8080 in the Port field. Please note that you cannot enter any other value if you want to use the VPN Wizard. Also, make sure that HTTPS has been selected.

STEP 3 Click Save Settings.

STEP 4 Click VPN > Summary and make sure the Tunnel(s) available are not zero.

STEP 5 Ensure that the LAN IP addresses of routers with VPN are in different subnets in order for the VPN connection to work.

NOTE The VPN Setup Wizard assumes that no firewall/NAT device sits in front of the VPN router.

Running the VPN Router Software Wizard

STEP 1 Access the VPN Setup Wizard in one of two ways:

•If you have an RVS4000, WRVS4400N v1.1, or WRVS4400N v2 Installation CD-ROM, insert it into your CD-ROM drive.

•Download the VPN Setup Wizard from the Cisco Support site for your router.

STEP 2 Go to the Start menu and click Run. In the field provided, enter

D:\VPN Setup Wizard.exe

STEP 3 The Welcome window appears. Click the Click Here to Start button.

Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 161