Setting Up and Configuring the WRVS4400N Wireless-N Router

5

 

Setting Up Your Wireless-N Router

 

 

 

 

 

Keep Alive: Redial period—Select this option, to have the router periodically check your Internet connection. If you are disconnected, then the router automatically reestablishes your connection. To use this option, click the option next to Keep Alive. In the Redial Period field, specify how often you want the router to check the Internet connection. This option is enabled by default and the default Redial Period is 30 seconds. Use this option to minimize your Internet connection response time as it is always connected.

L2TP

In European countries that provides this service, select L2TP from the Internet Connection Type drop-down menu to use the Layer 2 Tunneling Protocol (L2TP) service that tunnels Point-to-Point Protocol (PPP) across the Internet. Check with your ISP for the necessary setup information, and enter the following:

IP Address—Enter the user name and password provided by your ISP. This is the router’s IP address, when seen from the WAN or the Internet.

Subnet Mask—Enter the subnet mask provided by your ISP along with your IP address. This is the router’s Subnet Mask.

Gateway—Enter the default gateway IP address provided by your ISP.

L2TP Server—Enter the IP address of the L2TP server.

Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide

48

Page 48
Image 48
Cisco Systems WRVS4400NRF manual L2TP