Cisco Systems WRVS4400NRF manual Configuring Basic Setup Settings, Advanced Routing, Management

Setting Up and Configuring the WRVS4400N Wireless-N Router	5
Setting Up Your Wireless-N Router

Configuring Basic Setup Settings

You can configure the following basic setup settings:

•WAN

Click Setup > WAN and select the appropriate Internet connection type according to your ISP if connecting your WAN port to the WAN (DSL or cable modem). Otherwise, most cases can use the default setting to get a WAN port IP address from a DHCP server.

•Advanced Routing

Click Setup > Advanced Routing. If you are connecting the router to the Internet, use the default setting. Otherwise, select Router in the Operation Mode field to disable NAT (Network Address Translation).

•Management

Click Administration > Management and change the access password for the router’s web-based utility. The default username and password are admin.

You can also customize the wireless settings:

•Wireless

Click Wireless > Basic Settings and change the default SSID on the window. Select the level of security in the Wireless > Security Settings window and complete the options for the selected security mode. When the appropriate security mode is configured, disable SSID Broadcast on the Basic Settings window.

Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 37