Cisco Systems WRVS4400N manual Environment, Configuring the VPN Settings for the VPN Routers

Configuring a Gateway-to-Gateway IPSec Tunnel

Environment

C

Environment

The following is a list of equipment you need:

•Two Windows desktop PCs (each PC connects to a VPN Router)

•Two VPN routers that are both connected to the Internet

Configuring the VPN Settings for the VPN Routers

•“Configuring the VPN Settings for VPN Router 1” on page 204

•“Configuring the VPN Settings for VPN Router 2” on page 205

Configuring the VPN Settings for VPN Router 1

Follow these instructions for the first VPN Router, designated VPN Router 1. The other VPN Router is designated VPN Router 2.

STEP 1 Launch the web browser for a networked PC, designated PC 1.

STEP 2 Enter the VPN Router’s local IP address in the Address field (default is 192.168.1.1). Then press Enter.

A password request window appears. (Non-Windows XP users see a similar window.)

STEP 3 Complete the User Name and Password fields (admin is the default user name and password). Then, click the OK button.

The main window appears.

STEP 4 Click VPN > IPSec VPN.

STEP 5 For the VPN Tunnel setting, select Enabled.

STEP 6 Enter a name in the Tunnel Name field.

STEP 7 For the Local Secure Group, select Subnet. Enter VPN Router 1’s local network settings in the IP Address and Mask fields.

Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 204