Cisco Systems WRVS4400NRF manual Viewing Status

Setting Up and Configuring the WRVS4400N Wireless-N Router	5
Viewing Status

•Force Version—The default protocol version to use. Select Normal (uses RSTP) or Compatible (compatible with old STP). The default is Normal.

•Protocol Enable—Check this box to enable RSTP on the associated port. The default is unchecked (RSTP disabled).

•Edge—Check this box to specify that the associated port is an edge port (end station). Uncheck the box to specify that the associated port is a link (bridge) to another STP device. The default is checked (edge port).

•Path Cost—The RSTP path cost for the designated ports. Enter a number from 1 to 200000000, or auto (autogenerated path cost). The default is auto.

Viewing Status

The Status window allows you to view the current status on this router:

•Viewing WAN/Gateway Status on page 153

•Viewing Local Network Status on page 155

•Viewing Wireless LAN Status on page 157

•Viewing System Performance on page 158

Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 152