Cisco Systems WRVS4400NRF manual Click Save

Setting Up and Configuring the WRVS4400N Wireless-N Router	5
Configuring the Administration Settings

-Denial of Service Thresholds—Enter the number of DoS attacks that need to be detected (and blocked) by the software firewall before an e- mail alert is sent. The minimum value is 20, the maximum value is 100. Note that if IPS has been enabled, IPS blocks DoS attacks before they reach the firewall. In that case, check the IPS Report to see event details.

-Log Queue Length—The default is 50 entries (the router mails the log if there are more than 50 entries).

-Log Time Threshold—The default is 10 minutes (the router mails the log every 10 minutes).

-SMTP Mail Server—Enter the address (domain name) or IP address of the Simple Mail Transport Protocol server you use for outgoing e-mails.

-Email Address for Alert Logs—Enter the e-mail address the log is to be sent to.

-Return Email Address—The e-mail shows this address as the sender's address.

-Enable SMTP Authentication—If your SMTP server requires authentication, click this check box and enter the username and password in the fields below.

-E-mail Log Now—Press this button to cause the log to be e-mailed immediately.

•Syslog

-Enable Syslog—Select Enable if you want to use this feature.

-Syslog Server—Enter the IP address in the Syslog Server field when Enable Syslog is checked.

-Local Log—Enable this if you want to see the log locally on the router.

-View Log button—If Local Log is enabled, click View Log to view the event log on the router.

STEP 3 Click Save.

Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 128