Cisco Systems WRVS4400NRF manual Setting Up and Configuring the WRVS4400N Wireless-N Router

Setting Up and Configuring the WRVS4400N Wireless-N Router	5
Configuring the VPN Settings

-Tunnel Test—Click Connect to verify the tunnel status; the test result is updated in the Status column. If the tunnel is connected, you can disconnect the IPSec VPN connection by clicking Disconnect.

-Config—Click Edit to change the tunnel's settings. Click Trash to delete all of the tunnel's settings.

-Tunnels(s) Enabled—Displays the number of enabled tunnels.

-Tunnel(s) Defined—Displays the number of defined tunnels.

•VPN Clients Status

-No—The range of user number is from 1 to 5.

-Username—Displays the username of the VPN Client.

-Status—Displays the connection status of the VPN Client.

-Start Time—Displays the start time of the most recent VPN session for the specified VPN Client.

-End Time—Displays the end time of a VPN session if the VPN Client has disconnected.

-Duration—Displays the total connection time of the latest VPN session.

-Disconnect—Check the Disconnect box at the end of each row in the VPN Clients Table and click Disconnect to disconnect a VPN Client session.

Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 107