Cisco Systems WRVS4400NRF manual Setting Up Your Wireless-N Router

Setting Up and Configuring the WRVS4400N Wireless-N Router	5
Setting Up Your Wireless-N Router

Setting Up Your Wireless-N Router

This section describes how to configure the general settings of your router:

•Configuring Basic Setup Settings on page 37

•Displaying A Read-Only Summary of the Basic Router Information on page 38

•Configuring Internet Connection Settings on page 40

•Configuring DDNS Service Settings on page 50

•Configuring Local Area Network (LAN) Settings on page 52

•Using The DMZ (Demilitarized Zone) Host Feature to Access Special Purpose Internet Services on page 55

•Cloning Your Network Adapter’s MAC Address onto Your Router on page 57

•Configuring the Router’s Advanced Settings on page 58

•Changing the Router’s Time Settings on page 62

•Selecting IPv4 Mode or Dual Stack IPv4 And IPv6 Mode on page 64

The Setup window contains all of the router’s basic setup functions. You can use the router in most network settings without changing any of the default values.

Some users may need to enter additional information to connect to the Internet through an ISP (Internet Service Provider) or broadband (DSL, cable modem) carrier.

Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 36