Cisco Systems WRVS4400NRF manual Configuring PC 1 and PC

Configuring a Gateway-to-Gateway IPSec Tunnel

Configuring PC 1 and PC 2

C

Configuring the Key Management Settings for VPN Router 2

For VPN Router 2, follow the same instructions as you did for configuring VPN

Router 1.

Configuring PC 1 and PC 2

STEP 1 Set PC 1 and PC 2 to be DHCP clients (refer to Windows Help for more information).

STEP 2 Verify that PC 1 and PC 2 can ping each other (refer to Windows Help for more information).

If the computers can ping each other, then you know the VPN tunnel is configured correctly. You can select different algorithms for the encryption, authentication, and other key management settings for VPN Routers 1 and 2.

Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 207