Cisco Systems WRVS4400NRF Windows 2000 or XP Instructions, For the Router’s Web-based Utility

Finding Out MAC and IP Addresses

Windows 2000 or XP Instructions

D

Windows 2000 or XP Instructions

STEP 1 Click Start and Run. In the Open field, enter cmd. Press the Enter key or click the OK button.

STEP 2 At the command prompt, enter ipconfig /all. Then press the Enter key.

STEP 3 Write down the Physical Address as shown on your computer screen. It is the MAC address for your Ethernet adapter. This appears as a series of numbers and letters. The MAC address/Physical Address is what you will use for MAC address cloning or MAC filtering.

For the Router’s Web-based Utility

For MAC address cloning, enter the MAC Address in the MAC Address field or select Clone My PCs MAC.

Click Save Settings to save the MAC Cloning settings or click the Cancel

Changes button to undo your changes.

Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 209