Cisco Systems WRVS4400NRF manual L2 Switch, Status

Setting Up and Configuring the WRVS4400N Wireless-N Router	5
Navigating the Utility

L2 Switch

This window allows you to configure layer 2 switching features on the 4 port

Ethernet switch (LAN ports only) through the following windows:

•Create VLAN—Creates a Virtual Local Area Network (VLAN) assignment.

•VLAN & Port Assignment—Configures VLAN and port settings.

•RADIUS—Configures Remote Authorization Dial-In User Service (RADIUS) settings.

•Port Setting—Configures port speeds and duplex operation.

•Statistics—Displays statistics for both received and transmitted packets.

•Port Mirroring—Configures port mirroring.

•RSTP—Configures RSTP (Rapid Spanning Tree Protocol) settings.

Status

This window allows you to monitor the current status of the router through the following windows:

•Gateway—Provides basic information like firmware version and status information on the WAN port.

•Local Network—Provides status information about the local network (four Ethernet ports).

•Wireless LAN—Provides status information on Wireless LAN.

•System Performance—Provides traffic statistics on LAN and Wireless LAN ports.

Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 35