Cisco Systems WRVS4400NRF manual Setting Up and Configuring the WRVS4400N Wireless-N Router

Setting Up and Configuring the WRVS4400N Wireless-N Router	5
Configuring the Administration Settings

-Ping Timeout—Enter the desired time period (in milliseconds). If a response is not received within the defined ping period, the ping is considered to have failed.

-Start Test—Click this button to begin the test. A new window appears and display the test results. A summary of the test results appears at the bottom of this window.

-Ping Result. Displays the ping status results.

•TraceRoute Test Parameters

-TraceRoute Target—Enter the IP address or host name to perform the traceroute testing.

-Start Test—Click this button to begin the test. A new window appears and display the test results.

•Cable Diagnostics

-Port—Select a port number from the drop-down menu.

-Apply—Click this button to perform a cable diagnostics test.

-Pair—Identifies a specific pair (A, B, C, or D) in the cable. Each cable consists of 8 pins (4 pairs).

-Cable Length—Displays the length of the cable in meters.

-Status—Displays the status of the pair.

STEP 3 Click Save.

Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 130