Cisco Systems WRVS4400NRF manual Back Panel, WRVS4400N Antennas

Getting Started with the WRVS4400N Router	4
Back Panel

Back Panel

The Ethernet ports, Internet port, Reset button, and Power port are on the back panel of the router.

RESET Button—The Reset button can be used in two ways:

•If the router is having problems connecting to the Internet, press the Reset button for just a second with a paper clip or a pencil tip. This is similar to pressing the reset button on your personal computer to reboot it.

•If you are experiencing extreme problems with the router and have tried all other troubleshooting measures, press and hold in the Reset button for 10 seconds. This restores the factory defaults and clears all of the router settings, such as port forwarding or a new password.

INTERNET Port—Provides a WAN connection to a cable modem or DSL modem.

ETHERNET Ports 1-4—Provide a LAN connection to network devices, such as PCs, print servers, or additional switches.

POWER Port—Connects the router to power via the supplied AC power adapter.

WRVS4400N Antennas

The router has three non-detachable 1.8dBi omni-directional antennas. The three antennas have a base that can rotate 90 degrees when in the standing position.

The three antennas support 2X3 MIMO diversity in wireless-N mode.

Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 20