Cisco Systems WRVS4400NRF manual Configuring VPN Passthrough, Click VPN VPN Passthrough, Disabled

Setting Up and Configuring the WRVS4400N Wireless-N Router	5
Configuring the VPN Settings

Configuring VPN Passthrough

The VPN > VPN Passthrough window displays the settings needed to allow users to have the router pass through the traffic, using their own VPN algorithms to connect to their remote routers.

To configure VPN Passthrough settings for the router, follow these steps:

STEP 1 Click VPN > VPN Passthrough.

STEP 2 Configure VPN Passthrough settings.

•IPsec Passthrough—Internet Protocol Security (IPsec) is a suite of protocols used to implement secure exchange of packets at the IP layer. IPsec Passthrough is enabled by default to allow IPsec tunnels to pass through the router. To disable IPsec Passthrough, select Disabled.

•PPTP Passthrough—Point-to-Point Tunneling Protocol (PPTP) allows the Point-to-Point Protocol (PPP) to be tunneled through an IP network. PPTP Passthrough is enabled by default. To disable PPTP Passthrough, select

Disabled.

Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 117