Setting Up and Configuring the WRVS4400N Wireless-N Router

5

 

Setting Up Your Wireless-N Router

 

 

 

 

 

Heart Beat Signal

In Australia, select Heart Beat Signal from the Internet Connection Type drop- down menu to use this service. Check with your ISP for the necessary setup information, and enter the following:

User Name and Password—Enter the user name and password provided by your ISP.

Heart Beat Server—Enter the IP address of the Heart Beat server.

Connect on Demand: Max Idle Time—Configure the router to cut the Internet connection after it has been inactive for a specified period of time (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the router to automatically re- establish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the Connect on Demand option and enter the number of minutes you want to have elapsed before your Internet connection terminates in the Max Idle Time field. Use this option to minimize your DSL connection time if it is charged based on time. This option is disabled by default.

Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide

47

Page 47
Image 47
Cisco Systems WRVS4400NRF manual Heart Beat Signal