Cisco Systems WRVS4400NRF manual Configuring Internet Access Policy, Scheduling

Setting Up and Configuring the WRVS4400N Wireless-N Router	5
Configuring Firewall Settings

•Log—If checked, this ACL rule is logged when a packet match happens.

•Log Prefix—This string is attached in front of the log for the matched event.

•Source Interface—SelectLAN, WAN, or ANY interface.

•Source—The source IP address to be matched against. You can define a Single IP address, a Range of IP addresses (start IP and end IP), a Network (IP Prefix and Network Mask), or ANY IP addresses.

•Destination—The destination IP address to be matched against. You can define a Single IP address, a Range of IP addresses (start IP and end IP), a Network (IP Prefix and Network Mask), or ANY IP addresses.

•Service Management Button—Click this button and the Service Tab to add new service type to the Service drop-down menu.

•Scheduling

-Time—Enter the time period in which this rule is applied (used together with Date). It can be set to Any Time.

-Date—Enter the days in a week on which this rule is applied (used together with Time). It can be set to Any Day.

STEP 3 Click Save.

Configuring Internet Access Policy

The Firewall > Internet Access Policy window displays the policies that are used by the router to control access to the Internet. A policy consists of four components:

•The MAC- or IP- addresses of the personal computers to which to apply this policy

•Whether to Deny or Allow Internet service for this policy

•The time and date on which to enable this policy, and

•The URLs or Keywords to apply this policy.

Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 94