Cisco Systems WRVS4400NRF manual Configuring Internet Connection Settings

Setting Up and Configuring the WRVS4400N Wireless-N Router	5
Setting Up Your Wireless-N Router

•Log Setting Status

-E-mail—If this entry appears in the window, email cannot be sent because you have not specified an outbound SMTP server address. Click E-mailto display the Administration > Log window where you can configure the SMTP mail server.

Configuring Internet Connection Settings

The Setup > WAN Setup window displays Internet Connection Type and DDNS settings for configuring WAN port of the wireless router.

To configure the WAN settings for the router, follow these steps:

STEP 1 Find out the Internet connection type and the settings used by your ISP. If the router is used as an Intranet router, you can in most cases use the default settings.

STEP 2 If you wish to use the dynamic DNS feature, sign up for a DDNS service. STEP 3 In the router’s web-based configuration utility, click Setup > WAN.

STEP 4 From the Internet Connection Type drop-down menu, select a connection type.

Based on your selection, the web-based utility displays relevant fields.

The router supports six connection types. For more information on how to configure the settings for these connection types, see the following sections:

•Automatic Configuration - DHCP Server on page 42

•Static IP on page 43

•PPPoE on page 44

•PPTP on page 45

•Heart Beat Signal on page 47

•L2TP on page 48

Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 40