Cisco Systems WRVS4400NRF manual ProtectLink, QoS

Setting Up and Configuring the WRVS4400N Wireless-N Router	5
Navigating the Utility

ProtectLink

This window allows you to check e-mail messages, filter website addresses (URLs), and block potentially malicious websites for the Cisco ProtectLink Web hosted service, thereby providing security for your network.

VPN

This window allows you to configure VPN tunnels and accounts to establish a secured channel through the Internet through the following windows:

•Summary—Displays IPSec tunnel status summary.

•IPSec VPN—Allows the VPN router to create one or multiple tunnels (or secure channels) each connecting between two endpoints, so that the transmitted data or information between these endpoints is secure.

•VPN Client Accounts—Designates VPN clients and their passwords.

•VPN Pass Through—Allows you to disable IPSec Passthrough, PPTP Passthrough, and L2TP Passthrough.

QoS

This window allows you to configure the two types of QoS traffic supported by the router through the following windows:

•Bandwidth Management—Allows you to perform bandwidth management by selecting either the Rate Control or Priority setting.

•QoS Setup—Allows users to configure the QoS Trust Mode for each LAN port.

•DSCP Settings—Allows you to set the Differentiated Services Code Point (DSCP).

Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 33