Cisco Systems WRVS4400NRF manual Configuring Vlan & QoS Settings, Click Wireless Vlan & QoS

Setting Up and Configuring the WRVS4400N Wireless-N Router	5
Configuring Wireless Settings

Configuring VLAN & QoS Settings

The Wireless > VLAN & QoS window displays the QoS and VLAN settings for the router’s Access Point. The QoS (Quality of Service) feature allows you specify priorities for different traffic. Lower priority traffic slows down to allow greater throughput or less delay for high priority traffic.

The 802.1Q VLAN feature allows traffic from different sources to be segmented. Combined with the multiple SSID feature, this provides a powerful tool to control access to your LAN.

To configure the VLAN and QoS settings for the router, follow these steps:

STEP 1 Click Wireless > VLAN & QoS

STEP 2 Configure the VLAN and QoS settings for the router:

•VLAN

-Enable/Disable VLAN—Enable this feature only if the hubs/switches on your LAN support the VLAN standard.

-AP Management VLAN—Define the VLAN ID used for management.

-VLAN ID—Enter the VLAN ID.

Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 84