Getting Started with the WRVS4400N Router

4

 

Installing the Router

 

 

 

 

 

Installing the Router

To prepare the router for installation do the following:

Obtain the setup information for your specific type of Internet connection from your Internet Service Provider (ISP).

Power off all of your network hardware, including the router, PCs, and cable modem or DSL modem.

Perform the steps in this section to install the hardware.

STEP 1 Connect one end of an Ethernet network cable to one of the LAN ports (labeled 1- 4) on the back of the router. Connect the other end to an Ethernet port on a PC.

STEP 2 Repeat step 1 to connect up to four PCs, switches, or other network devices to the router.

Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide

24

Page 24
Image 24
Cisco Systems WRVS4400NRF manual Installing the Router