Cisco Systems WRVS4400N manual Configuring Connection Control, Click Wireless Connection Control

Setting Up and Configuring the WRVS4400N Wireless-N Router	5
Configuring Wireless Settings

Configuring Connection Control

The Wireless > Connection Control window displays the Connection Control settings for the router, giving you two ways to control the connection (association) of wireless client devices. You can either prevent specific devices from connecting to the router, or you can allow only specific client devices to connect to the router. The client devices are specified by their MAC addresses. The default is to allow only specific client devices.

To configure connection control for the router, follow these steps:

STEP 1 Click Wireless > Connection Control

STEP 2 Configure the Connection Control List to either permit or block specific wireless client devices connecting to (associating with) the wireless router:

•Select SSID—Select the desired SSID.

•Enabled/Disabled—Enable or disable wireless connection control. The default is Disabled.

Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 80