Cisco Systems WRVS4400NRF manual Configuring Radius Mode, Click L2 Switch Radius

Setting Up and Configuring the WRVS4400N Wireless-N Router	5
Configuring the L2 Switch Settings

Configuring RADIUS Mode

The L2 Switch > RADIUS window displays the settings for configuring and enabling the RADIUS mode for the router.

The RADIUS mode provides authentication on devices connecting to the LAN ports. This mode requires the installation of a RADIUS server on your local network.

To configure the RADIUS mode for the server, follow these steps:

STEP 1 Click L2 Switch > RADIUS.

STEP 2 Configure the RADIUS mode:

•Mode—Select Enabled or Disabled from the drop-down menu.

•RADIUS IP—Enter the RADIUS server’s IP address.

•RADIUS UDP Port—Enter the UDP port used to verify the RADIUS server authentication.

•RADIUS Secret—Enter the key string used for authenticating and encrypting all RADIUS communication between the router and the RADIUS server. This key must match the RADIUS server’s configuration.

Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 146