Cisco Systems WRVS4400NRF manual Configure VPN Tunnel

Using the VPN Setup Wizard	6
Running the VPN Router Software Wizard

Configure VPN Tunnel

•Router 1 User Name: Enter the user name of the Router 1.

•Router 1 Password: Enter the password of the Router 1.

•Router 2 User Name: Enter the user name of the Router 2.

•Router 2 Password: Enter the password of the Router 2.

•Tunnel Name: Enter a name for this tunnel.

•Pre-shared Key: IKE uses the Pre-shared Key field to authenticate the remote IKE peer. Both character and hexadecimal values are acceptable in this field; e.g.,“My_@123” or “0x4d795f40313233”. Note that both sides must use the same Pre-shared Key.

•Router 2 WAN IP address: Enter the WAN IP address of Router 2.

•Router 2 IP by DNS Resolved: Enter the DDNS Domain Name of Router 2 if it does not have a static IP address for its internet connection.

STEP 7 The router configuration is checked.

Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 165