Pelco DX9200HDDI manual Connecting Three Storage Units to ONE Recorder

CONNECTING THREE STORAGE UNITS TO ONE RECORDER

1.Connect a SCSI cable from Host A on Storage A to Channel A on the recorder.

2.Connect a SCSI cable from Host A on Storage B to Channel B on the recorder.

3.Connect a SCSI cable (DX9200HDDI-LCBL) from the Host A Out port on Storage A to the Host A In port on Storage C.

4.Plug the power cords into the units and into a universal power supply (UPS).

5.Turn on the power supplies on the rear of each storage unit. You can turn them on in any sequence.

6.Turn on each storage unitÕs main power.

7.Turn the recorder on.

Figure 7. Three Storage Unit/One Recorder Configuration

12 C637M-B (10/03)