Pelco DX9200HDDI manual Mounting, Rack Washers Screws

MOUNTING

The storage unit can be placed on a flat surface, such as a shelf, or it can be installed in a 19-inch (48.26 cm) wide equipment rack.

NOTE: Allow one rack unit (1.75 inches or 4.5 cm) of space above the storage unit for air circulation.

To install the storage unit in an equipment rack:

1.Attach the two brackets to each side of the storage unit.

2.Attach the support rails to the equipment rack.

3.Place the storage unit onto the support rails. It should easily slide in and out of the rack.

4.Fasten the rack ears to the equipment rack.

VIDEO STORAGE UNIT

	(8) SCREWS,
	10-32 X .375-INCH,
	FLAT HEAD
	SUPPORT RAILS
	(6) SCREWS,
	8-32 X .375-INCH,
	PAN HEAD WITH
RACK	WASHERS

(4) SCREWS,

10-32 X .375-INCH FLAT HEAD

BRACKET (SIDE VIEW)

(4)SCREWS, 10-32 X .750-INCH PHILLIPS, PAN HEAD WITH WASHERS

(6) SCREWS, M4 X .250-INCH PAN HEAD (3 EACH SIDE)

SLOTTED HOLES

TOWARDS FRONT

OF UNIT

TAPERED ENDS TOWARDS REAR OF UNIT

Figure 3. Rack Mount Installation

C637M-B (10/03) 9