Cisco Systems WRVS4400NRF manual Setting Up and Configuring Remote Groups

Setting Up and Configuring the WRVS4400N Wireless-N Router	5
Configuring the VPN Settings

Setting Up and Configuring Remote Groups

The Remote Group Setup section of the VPN > IPSec VPN window displays settings for configuring the remote groups of VPN tunnel connections.

To set up and configure a remote group, follow these steps:

STEP 1 Click VPN > IPSec VPN.

STEP 2 Configure Remote Group Setup settings.

•Remote Security Gateway Type—There are two types. They are IP Only, IP + Domain Name (FQDN) Authentication. The type of Remote Security Gateway should match with the Local Security Gateway Type of VPN devices in the other end of tunnel.

Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 111