Nortel Networks 1002rp manual Continue with Connecting the server to the Elan on

October 2006 Installing the server and connecting the peripheral devices

6Ensure that a single-point ground reference is available for all the power outlets serving the CallPilot server and its peripherals. Before the CallPilot server installation, a qualified electrician must implement the single-point ground reference requirement between the power outlets of the CallPilot server and the power outlets of the switch.

7Connect the power cord to the modem, and plug the other end into a wall receptacle or power bar.

Note: Ensure that the power source is consistent with the SBC for all ancillary equipment.

8Turn on the modem.

What’s next?

Continue with “Connecting the server to the ELAN” on page 68.

1002rp Server Hardware Installation 67