Nortel Networks 1002rp manual Supported peripheral devices

1002rp server description Standard 1.07

Supported peripheral devices

Introduction

This section identifies external devices that are supported by the 1002rp server.

Device	Description
Modem	A 56-Kbit/s external modem (NTRH9078) provides
	remote access to the 1002rp server. The modem connects
	to the RS-232 COM1 connector on the rear of the server.
	Since the modem is an external device, it requires its
	own AC power source referenced to the same ground as
	the 1002rp server and the switch to which it is connected.
Ethernet hub	A 10Base-T Ethernet hub provides the ELAN connection
	between the 1002rp server and the Meridian 1 switch or
	Succession 1000 system. The customer can supply a hub
	or switch from third-party vendors or from Nortel.
	Since the hub is an external device, it requires an AC
	power source.
	ATTENTION
	To comply with EMC radiation requirements, a Class A
	hub must be located 10 m (33 ft) away from the 1002rp
	server. Shielded Ethernet cables must be used.
Monitor, keyboard,	„ 15-in. monitor: NTRH9011 or N0038380 LCD
and mouse		monitor.
		Since the monitor is an external device, it requires its
		own AC power source.
	„	Keyboard: NTRH9013
	„	Mouse: NTRH9014

30 CallPilot