To unpack the equipment | 37 |
To remove the front bezel | 40 |
To remove the server cover | 41 |
To inspect the server interior | 42 |
To replace the front bezel after installation is complete | 44 |
To install the power supply module | 49 |
To bring DC power and ground into the PDU | 57 |
To install the server | 60 |
To set the modem DIP switches | 63 |
To connect the mouse, keyboard, and monitor to the server | 66 |
To connect the modem to the server | 66 |
To connect the server to the ELAN | 68 |
To connect the server to the CLAN | 71 |
To install the software feature dongle | 74 |
To connect the 1002rp AC server to power | 77 |
To connect the 1002rp DC server to power | 77 |
To start the server | 78 |
1002rp Server Hardware Installation | 9 |
