Nortel Networks 1002rp manual What’s next?

Installing the server and connecting the peripheral devicesStandard 1.07

DIP	Default	Change
switch	setting	to	Function
6	OFF	OFF	Carrier Detect (CD) override
			„ OFF: The modem sends a CD signal when it
				connects with another modem; it drops the
				CD on disconnect.
			„	ON: CD is always ON (override).
7	OFF	OFF	Power-on and ATZ reset software defaults
			„	OFF: Loads Y or Y1 configuration from
				user-defined NVRAM.
			„	ON: Loads &F0-Generic template from
				read-only memory (ROM).
8	ON	ON	AT command set recognition
			„ OFF: Disables command recognition (dumb
				mode).
			„	ON: Enables recognition (smart mode).

What’s next?

Continue with “Connecting peripherals to the server” on page 65.

64 CallPilot