October 2006 | Preparing for installation |
To remove the server cover
DANGER
Risk of electric shock
High current inside the chassis can cause severe injury.
CAUTION
Risk of equipment damage
Take precautions to protect internal components. Electrostatic discharge (ESD) can render boards damaged or unusable. Wear an ESD wrist strap.
1Remove the front bezel (see page 40).
2Loosen the three thumbscrews at the rear of the top cover.
3Remove the server cover by pulling the cover toward the rear of the chassis, and then lifting it up and off.
4Clip the lead from your ESD wrist strap to an unpainted metal section of the chassis.
What’s next?
Continue with “Inspecting the server interior” on page 42.
1002rp Server Hardware Installation | 41 |
