Connecting the Mixer Inputs
This mixer permits connection of up to eight (8) audio input sources, including up to two microphones. Such a system might include, for example:
Two Microphones | Two Microphones | Two Microphones |
Two Turntables | Two Turntables | Two Turntables |
Four CD players | Two CD players | Two CD players |
| Two Cassette Decks | One Rhythm Synth |
|
| One Cassette Deck |
Please observe the following:
Do not connect any audio source with a HIGH LEVEL OUTPUT to the LOW LEVEL PHONO 1 or PHONO 2 mixer audio input jacks (an audio source output with a volume control is HIGH LEVEL).
Connect audio inputs as follows:
1.DJ Microphone. Connect the DJ’s MIC 1 (not supplied) to the mic input jack in the upper left
corner of the mixer control panel. The special combo jack permits you to connect with either a 1/4” plug or XLR plug.
Use 1/4” or
DJ MIC
2.High Level Output Audio Sources. Connect up to 4 such sources (tuner, cassette deck, CD Player, camcorder or VCR) to the input jacks for Line 1 , Line 2, Line 3 and Line 4.
Use RCA type patch cables
High Level Output
Audio Source
LEFT output
RIGHT output
CD player, cassette deck, camcorder, VCR, etc.
4 – Pyle Pro Mixer Owner’s Manual
