Troubleshooting
Your mixer should require very little maintenance. If you have problems, refer to the chart below for possible solutions. If you cannot solve the problem, contact a qualified technician for assistance.
PROBLEM | POSSIBLE SOLUTION | |
Nothing works | • Check the AC connection. Make sure the AC outlet is “live.” | |
| • Check the power connection to the rest of the system | |
| (receiver/amplifier, etc.) | |
|
| |
No signal from an | • Check the control setting | |
audio input | ||
• Check the connection between the mixer and the input source | ||
source | ||
| ||
Hum from PHONO | • Check that the turntable’s ground wire (usually black or green) is | |
fastened securely to the GROUND SCREW on the mixer input | ||
| ||
| panel | |
|
| |
Hum from other | • Make sure there are no low level inputs connected to the LINE | |
source | input jacks | |
|
| |
Feedback is | • Move the microphone further away from the output speakers, | |
present | or use a directional microphone | |
|
|
Care and Maintenance
Your Pyle Pro Mixer is an example of superior design and craftsmanship. The following suggestions will help you care for your mixer so you can enjoy years of use:
•Keep the mixer dry. If it gets wet, wipe immediately.
•Use the mixer only in
•Handle the mixer gently and carefully - do not drop!
•Keep the mixer away from dust and dirt.
•Wipe occasionally with a damp cloth to keep it looking new. Do not use harsh chemicals, solvents or detergents!
Please complete warranty card, detach and return
Here
Stamp
Place
Audio, Inc. | Street | NY 11204 |
PYLE PRO | 1600 63rd | Brooklyn, |
12 – Pyle Pro Mixer Owner’s Manual
