PYLE Audio PYD-1002 Using the Microphone, Using the Crossfader with the Assign, Talkover Mode

Using the Microphone

Incorporating Voice into the Mix

To blend voice from the microphone with the audio program material, adjust the turn the MIC 1 Talkover Switch to ON and use the MIC1 level slider to increase or decrease the microphone level. This will not affect the main volume inputs. When the microphone is not in use, set the MIC level slider to “0.”

Talkover Mode

Talkover mode allows a voice to be heard clearly through the microphone by attenuating all the other audio input sources. This mode is engaged by setting the Talkover Switch to the TALKOVER position. When not using the microphone, set this switch to the OFF position.

Using the Crossfader with the Assign

Switches (PYD-1005)

For crossfading effects, you can assign any of the three channels to either A or B sides of the crossfade mix using the Crossfade assign knobs.

When the crossfade slider is in the center position, the two assigned channels play equally. Sliding the control towards the A position will increase the level of A and fade out B proportionally to the distance from center. Likewise, sliding the control towards the B position will increase the level of B and fade out A.

Talkover Switch

Crossover Assign

Switches

8 – Pyle Pro Mixer Owner’s Manual