Panasonic DMC-L1K, VQT0W82 operating instructions Manual Exposure, Press the shutter button halfway

Basic

Manual Exposure [ ]

Determine the exposure by manually setting the aperture value and the shutter speed.

1 Set the aperture value and the shutter speed.

Rotate the aperture ring to set the aperture value.

A

B

A: [2.8] to [22]

•When changing from [A], rotate the aperture ring while pressing the aperture ring button B.

Rotate the shutter speed dial to set the shutter speed.

4 8

	2-		/	1
		6 B
	A		0	5
C			s
	1000			03
	4	000
		0
	0			60
	5		0
				125
			5
			2

M F 22	1000
STANDARD
WB	-2	-1	0	+1	+2
AUTO
ISO
100
SINGLE				CUSTOM
				NORMAL
					19

C: [2-60s/B] to [1000-4000]

• The mode becomes manual exposure mode [ ].

•If the shutter speed dial is set to [2-60s/ B] or [1000-4000], press 3/4 or rotate

38

the command dial D to set the shutter speed.

M F 22 1000

STANDARD

WB	-2	-1	0	+1	+2
AUTO
ISO
100
	SINGLE			CUSTOM
				NORMAL
					19	D

•You can set from 1/2 of a second to

60 seconds in steps of [1/3 EV] if the shutter speed dial is set to [2-60s/B]. The next setting after 60 seconds is [B] (Bulb). Refer to P39 for information about the B (Bulb) setting.

•You can set from 1/1000 of a second to 1/4000 of a second in steps of [1/3 EV] if the shutter speed dial is set to [1000-4000].

•If you set [DIREC. EX. COMP.] (P85) to [ON], you cannot use the command dial.

2 Press the shutter button halfway.

E

F

E: Viewfinder Display

•Manual exposure assistance F appears for about 10 seconds to show an approximation of the exposure condition.

•If the exposure is not adequate, check the aperture value and the shutter speed that have been set.

3 Press the shutter button fully to take the picture.

VQT0W82