Preparation
Charging the Battery with the Charger
•The battery is not charged when the camera is shipped. Charge the battery before use.
1 Connect the AC cable.
A
•When you connect the AC cable, the [POWER] indicator A lights red.
•The battery cannot be charged when the DC cable is connected to the AC adaptor.
2 Align the battery with the marks on the AC adaptor and then place it straight into the AC adaptor. Check that it is firmly attached.
B
•Charging starts when the [CHARGE] indicator B lights green.
18
3 Detach the battery after charging is completed.
B
•Charging is completed when the [CHARGE] indicator B turns off (after about 130 minutes).
•After charging is completed, be sure to disconnect the AC cable from the electrical outlet.
•The battery becomes warm after using it and during and after charging. The camera also becomes warm during use. This is not a malfunction.
•The battery will be exhausted if left for a long period of time after being charged. Recharge the battery when it is exhausted.
•Use the dedicated AC adaptor and battery.
•Use the AC adaptor indoors.
•Do not disassemble or modify the AC adaptor.
VQT0W82
